LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 765 (Engine Control System & Fuel System - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Air Cleaner Outlet Resonator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of IAT Sensor Harness Connector
    GM851290Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor harness connector.
  2. Loosen the air cleaner assembly fresh air duct to resonator clamp.
    3. Fig 2: View Of Air Cleaner Outlet Resonator
    GM851256Courtesy of GENERAL MOTORS CORP.
  3. Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
  4. Loosen the resonator to throttle body clamp.
  5. Disconnect the air cleaner assembly fresh air duct from the resonator.
  6. Remove the air outlet resonator from the throttle body.
scientia non olet · About LEMON Manuals