Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Place the shift control in NEUTRAL before attempting to remove the shift knob screw.

Fig 1: View Of Shift Knob Bezel

Courtesy of GENERAL MOTORS CORP.

Pull the shift knob bezel (1) down to expose the shift knob retaining screw.

Fig 2: View Of Shift Knob Retaining Screw

Courtesy of GENERAL MOTORS CORP.

Remove the shift knob retaining screw (1).

Fig 3: View Of Shift Knob & Bezel

Courtesy of GENERAL MOTORS CORP.

Remove the shift knob (1) and bezel (2) from the shift control lever.