Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Place the shift control in NEUTRAL before attempting to install the shift knob screw.

Fig 1: View Of Shift Knob & Bezel

Courtesy of GENERAL MOTORS CORP.

Install the bezel (2) and shift knob (1) to the shift control lever.

NOTE: Refer to Fastener Notice .

Fig 2: View Of Shift Knob Retaining Screw

Courtesy of GENERAL MOTORS CORP.

Install the shift knob retaining screw (1).
Tighten: Tighten the screw to 2 N.m (18 lb in).

Fig 3: View Of Shift Knob Bezel

Courtesy of GENERAL MOTORS CORP.

Secure the shift knob bezel (1) to the shift knob.