LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Control Valve Body Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Control Valve Body Assembly
    GM1776844Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission side cover. Refer to Control Valve Body Cover Replacement .
  2. Remove the bolts (9, 12 and 16) from the control valve body assembly (18).
  3. Remove the control valve body assembly (18).
  4. Remove and discard the spacer plate assembly with bonded gasket (90).
scientia non olet · About LEMON Manuals