Tool Required

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 45201 Cooler Line Seal Removal. See Special Tools .

Fig 1: Inserting J 45201 Into Cooler Line Seal Bore

Courtesy of GENERAL MOTORS CORP.

Insert J 45201 collet (2) fully into the cooler line seal bore. See Special Tools .
Insert the forcing screw piece of the J 45201 (1) into J 45201 (2) and tighten. See Special Tools .

Fig 2: Removing Cooler Line Seal With J 45201

Courtesy of GENERAL MOTORS CORP.

Thread the J 45201 collar (2) onto J 45201 (3) and tighten until the tool has removed the seal. See Special Tools .
Use a pair of pliers to remove the cooler line seal from J 45201 . See Special Tools .