LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input Internal Gear, Forward Clutch Hub Install

Input Internal Gear, Forward Clutch Hub Install

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Forward Clutch Hub Assembly
GM1644734Courtesy of GENERAL MOTORS CORP.
IMPORTANT: Install the forward clutch hub and input internal gear assembly into the transmission case. Rotate the assembly while installing in order to spline the forward clutch hub (108) to the forward clutch plates (602).

Install the forward clutch hub and input internal gear assembly into the transmission case.

scientia non olet · About LEMON Manuals