LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Driven Sprocket Support Assembly Removal

Driven Sprocket Support Assembly Removal

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Driven Sprocket Support Assembly
    GM1644726Courtesy of GENERAL MOTORS CORP.
  1. Remove the driven sprocket to driven sprocket support thrust washer (92).
  2. Remove the driven sprocket support assembly (95).