Driver or Passenger Seat Back Cushion Heater Replacement

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Back Heater Element - Front

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
1	Heater Assembly, Seat Back Tip: Disconnect the electrical connectors.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the front seat. Refer to Front Seat Replacement - Bucket .
Remove the seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .

Heater Assembly, Seat Back
Tip: Disconnect the electrical connectors.