LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 747 (Wiper System & Washer System) >> Repair Instructions >> Windshield Wiper Blade Replacement (Chevrolet Coupe Sedan) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wiper Arm In Service Position
    GM871366Courtesy of GENERAL MOTORS CORP.
  1. Install the hook of the wiper arm through the opening in the wiper blade.
  2. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  3. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  4. Move the wiper arm back to the parked position.
  5. Operate the windshield wipers and inspect for proper operation.