LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 737 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankcase balancer. Refer to Crankshaft Balancer Replacement .
    2. Fig 1: View Of Drive Belt Tensioner
    GM412154Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner.
  3. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
    4. Fig 2: View Of Engine Front Cover
    GM412537Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine front cover to water pump bolt.
    5. Fig 3: View Of Engine Front Cover Bolts
    GM412538Courtesy of GENERAL MOTORS CORP.
  5. Remove the remaining engine front cover bolts.
  6. Remove the engine front cover.
    • If the engine front cover gasket is damaged.
    • Remove the front engine mount. Refer to Engine Mount Replacement .
    • Remove the engine front cover gasket if it is damaged.
scientia non olet · About LEMON Manuals