LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 737 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions - Off Vehicle >> Crankshaft Balancer Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Harmonic Balancer Holder J38122-A
    GM467429Courtesy of GENERAL MOTORS CORP.
  1. Install the J 38122-A  . See Special Tools .
  2. Remove the balancer retaining bolt and washer. Use the J 38122-A  and a breaker bar to prevent the crankshaft from rotating when loosening the bolt. See Special Tools .

    Discard the bolt.

    3. Fig 2: View Of Crankshaft Balancer
    GM412138Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft balancer assembly.
scientia non olet · About LEMON Manuals