Rear Turn Signal Lamp Bulb Replacement (Chevrolet Coupe)
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the tail lamp assembly. Refer to Tail Lamp Replacement (Chevy Coupe) or Tail Lamp Replacement (Chevy Pontiac Sedan) or Tail Lamp Replacement (Chevy Export) . |
|
| 1 | Wire Harness Connector Tip: Rotate counter-clockwise and remove from the tail lamp housing. |
| 2 | Tail Stop / Turn Signal Bulb
CAUTION:
Refer to Halogen Bulb Caution
. Tip: Remove the bulb from the wire harness connector. |