Rear Side Marker Lamp Replacement (Pontiac G5)

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Side Marker Lamp (Pontiac G5)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Side Marker Lamp Screw NOTE: Refer to Fastener Notice . Tighten: 2.5 N.m (22 lb in)
2	Rear Side Marker Lamp Housing Procedure Pull the rearward edge of the lamp away from the rear bumper fascia in order to release the front tab. Rotate the electrical bulb socket harness counter-clockwise and remove from the lamp housing.

Callout

Component Name

Rear Side Marker Lamp Screw

NOTE: Refer to Fastener Notice .

Tighten: 2.5 N.m (22 lb in)

Rear Side Marker Lamp Housing

Procedure

Pull the rearward edge of the lamp away from the rear bumper fascia in order to release the front tab.
Rotate the electrical bulb socket harness counter-clockwise and remove from the lamp housing.