Rear License Lamp Replacement (Pontiac G5)

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear License Lamp (Pontiac G5)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	License Plate Lamp Assembly Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2.5 N.m (22 lb in)
2	License Plate Lamp Assembly Tip: Remove the lamp assembly from inside the rear bumper fascia and disconnect the bulb socket.