LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 735 (Lighting Systems) >> Repair Instructions >> Rear License Lamp Replacement (Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of License Lamp
    GM1549359Courtesy of GENERAL MOTORS CORP.
  1. Remove the license plate from the rear bumper fascia.
  2. Remove the screws (1) from the license plate lamp.
  3. Remove the license plate lamp (2) from the rear bumper fascia.
  4. Remove the bulb/socket from the license plate lamp (2) by turning counterclockwise.
  5. Remove the bulb from the socket.