LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 735 (Lighting Systems) >> Diagnostic Information and Procedures >> Front Fog Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Front Fog Lamp Switch parameter while activating the front fog lamp switch. The parameter should change between Active and Inactive.
    • If the parameter does not change between the commanded states, refer to Fog Lamp Switch Malfunction in Circuit/System Testing .
  2. Activate the front fog lamp switch and observe the fog lamps. The fog lamps should illuminate.
scientia non olet · About LEMON Manuals