LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Lid Strut Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Rear Compartment Lid Strut
    GM738146Courtesy of GENERAL MOTORS CORP.
  1. Press the rear compartment lid assist rod onto the upper rear compartment lid assist rod ball stud.
  2. Press the rear compartment lid assist rod onto the lower assist rod ball stud.
  3. Ensure that both clips are fully seated on the rear compartment assist rod.
  4. Close the rear compartment.