Seat Belt Height Adjuster Replacement - Front

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Belt Height Adjuster

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the center upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement (Sedan) .
1	Bolt, Seat Belt Height Adjuster (Qty: 2) Tighten: 45 N.m (33 lb ft)
2	Height Adjuster, Seat Belt