Engine Coolant Temperature Sensor Replacement
WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Partially drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) or Cooling System Draining and Filling (Static Fill LNF) . |
|
| 1 | Engine Coolant Temperature Sensor
NOTE:
Refer to Fastener Notice
. Procedure: Disconnect the electrical connector. Tighten: 20 N.m (15 lb ft) |