LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 730 (Engine Controls And Fuel - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Charge Air Cooler Outlet Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Charge Air Cooler Outlet Pipe
    GM2002696Courtesy of GENERAL MOTORS CORP.
  1. Loosen the charge air cooler outlet pipe clamp (1) at the intake manifold (2).
  2. Disconnect the engine wiring harness electrical connector from the intake air pressure and temperature sensor.
  3. Remove the front bumper fascia air deflector. Refer to Front Bumper Fascia Air Deflector Replacement .
    4. Fig 2: View Of Charge Air Cooler Outlet Pipe Clamp & Charge Air Cooler Assembly
    GM2002697Courtesy of GENERAL MOTORS CORP.
  4. Loosen the charge air cooler outlet pipe clamp (1) at the charge air cooler assembly (2).
  5. Remove the charge air cooler outlet pipe (3).
scientia non olet · About LEMON Manuals