Charge Air Bypass Valve Solenoid Replacement
WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement . |
|
| 1 | Charge Air Bypass Valve Solenoid Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Charge Air Bypass Solenoid Vacuum Hose Clamp (Qty: 3) Procedure: Reposition the clamps in order to remove the hoses. |
| 3 | Charge Air Bypass Valve Solenoid Procedure: Disconnect the electrical connector. |