LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 726 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Outlet Hose Replacement (L61, LE5) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Heater Core Tubes And Outlet Hose
    GM872578Courtesy of GENERAL MOTORS CORP.
  1. Install the heater outlet hose to the heater core.
  2. Reposition the hose clamp to secure the hose using J 38185  .
    3. Fig 2: Identifying Heater Outlet Hose (2.2L)
    GM872575Courtesy of GENERAL MOTORS CORP.
  3. Install the heater outlet hose to the engine.
  4. Reposition the hose clamp to secure the hose using J 38185  .
  5. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) or Cooling System Draining and Filling (Static Fill LE5, L61) or Cooling System Draining and Filling (Static Fill LNF) .
  6. Remove the drain pan from under the vehicle.
  7. Install the dash panel exterior sound barrier.
scientia non olet · About LEMON Manuals