LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 726 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Inlet Hose Replacement (L61, LE5) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Heater Inlet Hose Clamp At Heater Core
    GM872572Courtesy of GENERAL MOTORS CORP.
  1. Install the heater inlet hose to the heater core.
  2. Reposition the hose clamp to secure the hose using J 38185  .
    3. Fig 2: Identifying Heater Inlet Hose
    GM872574Courtesy of GENERAL MOTORS CORP.
  3. Install the heater inlet hose to the engine.
  4. Reposition the hose clamp to secure the hose using J 38185  .
  5. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) or Cooling System Draining and Filling (Static Fill LE5, L61) or Cooling System Draining and Filling (Static Fill LNF)

    .

  6. Remove the drain pan from under the vehicle.
  7. Install the dash panel exterior sound barrier.
scientia non olet · About LEMON Manuals