Body Lock Pillar Garnish Lower Molding Replacement (Sedan)
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedures: Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement
. |
|
| 1 | Retainer, Lock Pillar Lower Panel |
| 2 | Panel Assembly, Lock Pillar Lower |
| 3 | Clip, Lock Pillar Lower Panel |