Front Bumper Impact Bar Replacement

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Bumper Impact Bar

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1	Front Bumper Impact Bar Bolt (Qty: 6) NOTE: Refer to Fastener Notice . Tip: The energy absorber is attached to the fascia. Tighten: 30 N.m (22 lb ft)
2	Front Bumper Impact Bar