LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Engine Mechanical - 2.4L (LE5)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Intake Manifold Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of intake manifold cover
    GM1752244Courtesy of GENERAL MOTORS CORP.
  1. Place the intake manifold cover onto the engine over the studs.
  2. Push down on the intake manifold cover directly over the lower right stud in order to engage the cover to the stud.
  3. Push down on the intake manifold cover directly over the upper left stud in order to engage the cover to the stud.
  4. Install the engine oil fill cap.
scientia non olet · About LEMON Manuals