LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Engine Mechanical - 2.4L (LE5)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Harmonic Balancer Holder J38122-A
    GM467429Courtesy of GENERAL MOTORS CORP.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Use J 38122-A  to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
  3. Remove and discard the crankshaft balancer bolt.
    4. Fig 2: View Of Crankshaft Balancer
    GM412138Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals