LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Engine Mechanical - 2.4L (LE5)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Oil Cooler Installation

Engine Oil Cooler Installation

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Cooler
    GM1631331Courtesy of GENERAL MOTORS CORP.
  1. Install the oil cooler.
    2. NOTE: Refer to Fastener Notice .
  2. Install the oil cooler bolt and studs.

    Tighten:  Tighten the bolts and studs to 22 N.m (16 lb ft).

scientia non olet · About LEMON Manuals