Draining Procedure
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left front wheel. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) .
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Clean away all dirt and debris from the transmission fluid drain plug area.
- Remove the drain plug.
- Allow the system to drain.
- Install the transmission fluid drain plug, using pipe sealant Saturn P/N 21485278 or equivalent on the plug threads.
Tighten: Tighten the transmission fluid drain plug to 38 N.m (28 lb ft).
NOTE:
Refer to FASTENER NOTICE
.