Synchronizers Cleaning and Inspection
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the synchronizer with clean solvent.
- Air dry the components.
- Inspect the synchronizer teeth for the following conditions:
- Wear
- Scuffing
- Nicks
- Burrs
- Breaking
- Inspect the keys or the springs for the following:
- Wear
- Cracks
- Distortion
If any of the following conditions exist, replace synchronizer.