LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Engine Cooling System) >> Repair Instructions >> Radiator Outlet Hose Replacement (2.0L (LSJ)) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Outlet Hose & Radiator - 2.0L
    GM1380620Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator outlet hose to the radiator.
  2. Reposition the radiator outlet hose clamp to secure the hose using J 38185  . See Special Tools .
  3. Install the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .
    4. Fig 2: View Of Radiator Outlet Hose & Engine - 2.0L
    GM1380626Courtesy of GENERAL MOTORS CORP.
  4. Install the radiator outlet hose to the engine.
  5. Reposition the radiator outlet hose clamp to secure the hose using J 38185  . See Special Tools .
  6. Install the fan shroud. Refer to Fan Shroud Replacement .
  7. Install the air intake duct.
  8. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ))  or Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5))  or Draining and Filling Cooling System (GE 47716 Fill) .
scientia non olet · About LEMON Manuals