LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (2.0L (LSJ)) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Radiator Inlet Hose
    GM1380615Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose to the radiator.
  2. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
    3. Fig 2: View Of Radiator Inlet Hose & Engine - 2.0L
    GM1380611Courtesy of GENERAL MOTORS CORP.
  3. Install the radiator inlet hose to the engine.
  4. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
  5. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ))  or Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5))  or Draining and Filling Cooling System (GE 47716 Fill) .
scientia non olet · About LEMON Manuals