LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Engine Cooling System) >> Repair Instructions >> Fan Shroud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooling fan assembly from the vehicle. Refer to Cooling Fan and Shroud Replacement (2.0L (LSJ))  or Cooling Fan and Shroud Replacement (2.2L (L61), 2.4L (LE5)) .
    2. Fig 1: View Of Cooling Fan Blade Retaining Clips
    GM872565Courtesy of GENERAL MOTORS CORP.
  2. Scribe the position of each of the cooling fan blade on the cooling fan motor shaft.
  3. Remove the cooling fan blade retaining clips and discard.
    4. Fig 2: View Of Cooling Blade Fans
    GM877647Courtesy of GENERAL MOTORS CORP.
  4. Remove the cooling fan blade.
    5. Fig 3: View Of Cooling Fan Motors
    GM891181Courtesy of GENERAL MOTORS CORP.
  5. Remove the cooling fan motor bolts and remove the cooling fan motor.
scientia non olet · About LEMON Manuals