Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coolant Heater Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the coolant heater cord (1).

Fig 2: Removing Heater Cord Clip From Shock Tower Stud ((RPOs) LE5/L61)

Courtesy of GENERAL MOTORS CORP.

If equipped with regular production options (RPOs) LE5/L61, remove the air cleaner nut (1).
Remove the heater cord clip (2) from the shock tower stud (3).

Fig 3: Removing Heater Cord Clip From Shock Tower Stud (RPO LSJ)

Courtesy of GENERAL MOTORS CORP.

If equipped with RPO LSJ, remove the coolant heater clip nut (1).
Remove the heater cord clip (2) from the shock tower stud (3).
Remove the coolant heater cord.