LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Engine Cooling System) >> Repair Instructions >> Charge Air Cooler Radiator Hose Replacement - Inlet >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Charge Air Cooler Reservoir & Hoses
    GM1380591Courtesy of GENERAL MOTORS CORP.
  1. Using the GE-47622  , compress the charge air cooler radiator inlet hose clamp. See Special Tools .
  2. Install the charge air cooler radiator inlet hose to the charge air cooler reservoir.
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Fig 2: View Of Charge Air Cooler Radiator Inlet Hose
    GM1382071Courtesy of GENERAL MOTORS CORP.
  5. Using the GE-47622  , compress the charge air cooler radiator inlet hose clamp. See Special Tools .
  6. Install the charge air cooler radiator inlet hose to the charge air cooler radiator.
  7. Lower the vehicle.
  8. Fill the cooling system. Refer to Draining and Filling Cooling System - Charge Air Cooling System .