Conditions for Setting the DTC
P0340
The ECM does not receive 4 camshaft pulses within 3 seconds.
P0341 - Near Engine Start, CMP Fast Event Based Test
The ECM detects the incorrect number of CMP sensor pulses in 2 revolutions of the crankshaft, which is usually within 1 second.
P0341 - After Engine Start, CMP Slow Event Based Test
The ECM detects the incorrect number of CMP sensor pulses in 2,000 revolutions of the crankshaft, which is usually within 4 minutes.
P0365
The ECM does not receive 4 camshaft pulses within 3 seconds
P0366 - Near Engine Start, CMP Fast Event Based Test
The ECM detects the incorrect number of CMP sensor pulses in 2 revolutions of the crankshaft, which is usually within 1 second.
P0366 - After Engine Start, CMP Slow Event Based Test
The ECM detects the incorrect number of CMP sensor pulses in 2,000 revolutions of the crankshaft, which is usually within 4 minutes.