Conditions for Setting the DTC
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
P0010 and P0013
The ECM detects an open, short to ground, or a short to voltage on the high control circuit or an open on the low reference circuit for more than 0.25 second.
P0011 and P0014
- The control module has enabled the CMP actuator.
- The difference between the desired CMP actuator angle and the actual CMP actuator angle is more than 6 degrees.
- The CMP actuator is steady for 3 seconds.
- The condition is present for 13.5 seconds.