LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Floor Shift Control Knob Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Place the shift control in NEUTRAL before attempting to remove the shift knob screw.
    Fig 1: View Of Shift Knob Bezel
    GM1662976Courtesy of GENERAL MOTORS CORP.
  1. Pull the shift knob bezel (1) down to expose the shift knob retaining screw.
    2. Fig 2: View Of Shift Knob Retaining Screw
    GM1662977Courtesy of GENERAL MOTORS CORP.
  2. Remove the shift knob retaining screw (1).
    3. Fig 3: View Of Shift Knob & Bezel
    GM1662978Courtesy of GENERAL MOTORS CORP.
  3. Remove the shift knob (1) and bezel (2) from the shift control lever.
scientia non olet · About LEMON Manuals