LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Floor Shift Control Knob Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Shift Knob & Bezel
    GM1662978Courtesy of GENERAL MOTORS CORP.
  1. Install the bezel (2) and shift knob (1) to the shift control lever.
    2. NOTE: Refer to Fastener Notice .
    Fig 2: View Of Shift Knob Retaining Screw
    GM1662979Courtesy of GENERAL MOTORS CORP.
  2. Install the shift knob retaining screw (1).

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

    3. Fig 3: View Of Shift Knob Bezel
    GM1662980Courtesy of GENERAL MOTORS CORP.
  3. Secure the shift knob bezel (1) to the shift knob.
scientia non olet · About LEMON Manuals