LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Automatic Transmission Control Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console trim plate. Refer to Console Front Trim Plate Replacement .
  2. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  3. Remove the shift cable retaining clip.
  4. Disconnect the shift cable from the shift control assembly.
  5. Fig 2: View Of Shift Control Mechanism
    GM1663966Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the shift lock solenoid harness connector (4).
  7. Remove the shift control nuts (2).
  8. Remove the shift control (3) from the vehicle.