LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Spacer Plate and Gasket Removal

Spacer Plate and Gasket Removal

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Spacer Plate To Channel Plate Gasket
    GM768695Courtesy of GENERAL MOTORS CORP.
  1. Remove the two spacer plate support bolts (20).
  2. Remove the spacer plate support (21)
    3. IMPORTANT: The non-Electronic Range Select Mode 4T40-E/4T45-E has a different spacer plate than the 4T45-E Electronic Range Select Mode transmission.
  3. Remove the spacer plate (23).
  4. Remove and discard the spacer plate to channel plate gasket (24).
scientia non olet · About LEMON Manuals