Second Clutch Plate Installation
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the 2nd clutch plates for excessive wear.
- Clean and dry each of the components.
- Assemble the 2nd clutch backing plate (99) with the flat side facing up.
- Assemble the three steel (97) and the three new fiber plates (98) in alternating order beginning with a fiber plate (98).
- Assemble the 2nd clutch wave plate (96).