Right Hand Axle Seal Assemble

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Driver Handle. See Special Tools .
J 41102-1A Axle Seal Installer. See Special Tools .

Fig 1: Identifying J 41102

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: You must use the J 41102-1A in order to install the seal correctly. See Special Tools . The J 41102-1A installs the axle seal to a given depth. See Special Tools .

Install a new right hand axle seal (2) into the transmission case. Use the J 41102-1A with the J 8092 . See Special Tools .
In order to prevent damage to the shaft splines during vehicle operation, add Polyurea grease (part number 7843867) to the splines on the output shaft.