LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Low and Reverse Servo Removal

Low and Reverse Servo Removal

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Servo Return Spring
    GM20169Courtesy of GENERAL MOTORS CORP.
    NOTE: Remove bolts evenly, to prevent bore damage.
  1. Remove the three servo cover bolts (25).
  2. Remove the servo cover assembly (Lo and Reverse) (73).
  3. Remove the servo return spring (66).