LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Input Internal Gear, Forward Clutch Hub Assemble >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 36850  TRANSJEL™. See Special Tools .

    Fig 1: View Of Input Internal Gear & Forward Clutch Hub
    GM20252Courtesy of GENERAL MOTORS CORP.
  1. Assemble the forward clutch hub (577) onto the input internal gear (560) and retain it with the snap ring (578).
  2. Assemble the thrust washer (109) onto the forward clutch hub (577) with the thrust washer tabs toward the forward clutch hub (577). Retain the thrust washer with J 36850  or equivalent. See Special Tools .
scientia non olet · About LEMON Manuals