LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Engine Controls And Fuel - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover.
  2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  3. Disconnect the engine fuel feed pipe from the chassis fuel flex hose. Refer to Metal Collar Quick Connect Fitting Service .
    4. Fig 1: View Of Fuel Line
    GM1387192Courtesy of GENERAL MOTORS CORP.
  4. Use a back up wrench on the fuel rail and disconnect the fuel feed pipe.
    5. Fig 2: Locating Fuel Feed Pipe Fastener (RPO Code LSJ)
    GM1389385Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel feed pipe fastener located on the engine.
  6. Remove the engine fuel feed pipe.
scientia non olet · About LEMON Manuals