LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Engine Controls And Fuel - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Engine >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Purge Pipe
    GM1387195Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine purge pipe from the evaporative emission (EVAP) canister purge valve.
  2. Disconnect the engine purge pipe from the throttle body.
  3. Remove the engine purge pipe.
scientia non olet · About LEMON Manuals