LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Engine Controls And Fuel - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Engine >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the engine purge pipe to the EVAP canister purge valve and the intake manifold.
    2. Fig 1: View Of Engine Purge Pipe
    GM1387195Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine purge pipe to the throttle body.
  3. Connect the engine purge pipe to the EVAP canister purge valve.
scientia non olet · About LEMON Manuals