Heated Seat Operation

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

When the heated seat switch is placed in either the high or low temperature position, battery positive voltage is applied through the heated seat switch signal circuit to the heated seat module. At the same time, battery voltage is also applied through one of two resisters in the switch and the heated seat HI/LO signal circuit to the module. In response to these switch signals, the heated seat module closes it's contacts and applies battery positive voltage through the heated seat element supply voltage to the seat heating elements. When the heated seat switch is in the HIGH heat position, battery voltage is applied through a 200 ohm resister and the module sets the seat temperature to high heat. When the heated seat switch is in the LOW heat position, battery voltage is applied through a 2,850 ohm resister and the module sets the seat temperature to low heat.