LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 679 (Engine Controls And Fuel - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Tank Filler Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Filler Pipe Jumper Hose
    GM889977Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel filler hose to the fuel filler pipe.
  2. Connect the fuel filler hose to the fuel tank.
  3. NOTE: Refer to Fastener Notice .
  4. Tighten the fuel filler hose clamps (1, 2).

    Tighten:  Tighten the clamps to 4.5 N.m (40 lb in).

  5. Lower the vehicle.
  6. Refill the fuel tank.